Todos los productos
Connectors & Sensors Manufacturer
Product Categories
J30J Series Connector, J30J-37TJL-15CM
Visión general
- Number of Pin/Plugs: 37 Pins/Plugs
- Uses twisted wire pins, with a contact pitch of 1.27 mm and a row pitch of 1.1 mm
- High density, miniaturization, high reliability
- Cable Length: 15 cm
- Suitable for wires with a cross-sectional area of 0.1 mm² to 0.15 mm²
- Product performance meets GJB 2446 requirements, equivalent to US military standard MIL-DTL-83513
- Execution Standard: Q/DJ-001-2017 "
J30J Series Connector, J30J-37TJL-40CM
Visión general
- Number of Pin/Plug: 37 Pins/Plug
- Uses twisted wire pins, with a contact pitch of 1.27 mm and a row pitch of 1.1 mm.
- Product Features: High density, miniaturization, high reliability.
- Cable Length: 40 cm
- Suitable for wires with a cross-sectional area of 0.1 mm² to 0.15 mm².
- Product performance meets GJB 2446 requirements, equivalent to US military standard MIL-DTL-83513.
- Execution Standard::Q/DJ-001-2017 "
J30J Series Connector, J30J-37TJL-100CM
Visión general
- Number of Pin/Plug :37 Pins/Plug
- Uses twisted wire pins, with a contact pitch of 1.27 mm and a row pitch of 1.1 mm.
- Product Features: High density, miniaturization, high reliability.
- Cable Length: 100 cm
- Suitable for wires with a cross-sectional area of 0.1 mm² to 0.15 mm².
- Product performance meets GJB 2446 requirements, equivalent to US military standard MIL-DTL-83513.
- Execution Standard: Q/DJ-001-2017 "
FD Series MIL-Spec Connector
Visión general
- Threaded connection, quick separation
- Hermetical design
- The socket adopts flame-proof structure, the flame-proof sheet can withstand high-temperature flame spray for a short time.
- Widely used in electrical circuit connection of vehicles, weapons, etc.
Unidad de medición inercial de alto rendimiento LINS688B
Principal Características
- Triaxial, digital gyroscope, ±450°/sec dynamic range
- Triaxial, digital accelerometer, ±20g
- Triaxial, digital magnetometer, ±8 gauss
- Digital pressure sensor, 300 mbar to 1100 mbar
- High bandwidth 400Hz
- Factory-calibrated sensitivity, bias, and axial alignment
- Calibration temperature range: −40°C to +85°C
- SPI-compatible serial interface
- Embedded temperature sensor
- Single-supply operation: 3.0 V to 3.6 V
- 2000 g shock survivability
- Small in size and light in weight
- Fully compatible with ADIS16488A
